[Cisco Router 1941] Настройка подключения по telnet

cisco-router-1941# conf t

cisco-router-1941(config)#service password-encryption

cisco-router(config)# line vty 0 4
cisco-router-1941(config-line)# password your_password
cisco-router-1941(config-line)# enable secret your_password

// чтобы работало ctrl + c
cisco-router-1941(config-line)# escape-character 3

cisco-router(config-line)# login
cisco-router(config)# end

$ telnet 192.168.1.100
Trying 192.168.1.100...
Connected to 192.168.1.100.
Escape character is '^]'.


User Access Verification

Password:
cisco-router-1941>enable
Password:
cisco-router-1941#

cisco-router-1941# copy running-config startup-config
Destination filename [startup-config]? startup-config
Building configuration...
[OK]
cisco-router-1941#